Nitek ER8400C Manual de usuario

INSTALLATION GUIDE NITEK ® De Schans 19-21 2a 8231 KA Lelystad Tel: +31(0)320-230005 E-mail: [email protected] WWW.NITEK.NL USA 5410 Newport Drive, # 24

Unit Dimensions IEC380 Connector Security Lock

Receiver Unit Network Output Port 1 RJ45 Connector @ 1 Gigabit Link Port 8 BNC Connectors @ 100Mbps each Dimensions

Product Warranty and Return Information Return Policy A. All returns for warranty, repair, credit or any other reason must be pre-authorized. A ret

Read all Safety Instructions. Keep the Instructions for future reference. Be sure to HEED all Warnings. Follow ALL instructions. DO NOT use this devic

Parts of the ER8400C (Front Panel) Network Connection Green = 1Gb YellowYellowYellow = 100Mb Orange = 10Mb Coax BNC Connectors LED Display Pan

Installment Topology Equipment Requirements & Mounting: The process for installing the ER8400C is rather quick and easy. A com-mon topology i

Wall Mounting Holes LAN 8 7 6 5 4 3 2 1 LAN Port Coax BNC Connectors IEC380 Connector Security Lock Parts of the

Simplified System Hookup Diagram Up to 1600 feet / 500m of coax cable Head-end Installation Continued: Connect the LAN port to your network switch or

Transmitter-end Installation ET1500U Units At the camera location securely mount the transmitter. Find the Link cable from the head-end and make s

Transmitter used as PoE Injector* Distance from Network Port PoE Device Power Available 30ft/10m 33 watts 325ft/100m 26 watts *Results with 48VDC

PoE Distance Chart 21.7 21.7 18.2 14.4 12.2 25.0 20.0 15.0 10.0 5.0 500 Meters 1,640 Feet 400 Meters 1,300 Feet 300 Meters 1,000 Feet 200 Meters 650 F