Nitek FSS20811S Manual de usuario descargar pdf

AC Inlet

Models FSS21611S & FSS20811S

16 & 8 Channel Video Optical Systems include either one FRS21611S

Receiver & one FTS21611S Transmitter or one FRS20811S Receiver &

one FTS20811S Transmitter

Installation and

Operation Manual

Introduction

The NITEK FSS21611S (16 Channel) and FSS20811S (8 Channel) fiber transmitter and receiver sets, are a fiber-optic

Universal-Mode™ system which can operate on either single-mode or multi-mode fiber. Digital transmission provides

broadcast quality video performance and bi-directional data, up to distances of 20Km (single-mode) and 1.2Km (multi-

mode). The RS422/RS485 port allows for the use of camera controls, the system begins communicating after power-up.

NITEK ®

De Schans 19-21 2a

8231 KA Lelystad

Tel: +31(0)320-230005

E-mail: [email protected]

WWW.NITEK.NL

USA

5410 Newport Drive, # 24

Rolling Meadows, IL 60008

Phone: (847) 259-8900

Fax: (847) 259-1300

E-mail: [email protected]

WWW.NITEK.NET

EUROPE

09172013

680160113

Note: This installation should be made by a qualified

service person and conform with local codes.

Reduce risk of fire or electrical shock. Do not

expose this product to rain or moisture.

Safety

The FSS21611S & FSS20811S use a Class 1 laser system in accordance with IEC 60825-1.

It is always advisable to follow good practice when working with optical fiber systems. This includes:

• Do not stare with unprotected eyes at fiber ends or connector faces.

• Use only approved filtered or attenuating viewing devices.

• For other safety issues and advice on good practices associated with optical fiber systems see IEC 60825-1 or your

local safety officer

The FSS21611S and FSS20811S can be either rack mounted, or resting on a desktop.

NOTES:

1. Use all four mounting screws to properly secure the unit to the rack.

2. Mechanical loading - The mounting ears were designed for two ears to support one unit.

3. Cable space - Allow for proper bend radius of the fiber cable exiting the back of the unit. Do not exceed the recom-

mended minimum bend radius of fiber cable, as internal breakage can occur.

Device Mounting Options

Video BNC

Connectors

Data Port

for Camera

Control

Fiber Optic

Port (SC)

1 2 3

Indice de contenidos

Pagina 1 - NITEK ®

AC Inlet Models FSS21611S & FSS20811S 16 & 8 Channel Video Optical Systems include either one FRS21611S Receiver & one FTS21611S Transmit

Pagina 2 - Installation Instructions

Installation Instructions Refer to the diagrams on the previous page and below for installation. Use best industry practices and follow all local bu

Pagina 3 - Troubleshooting

Troubleshooting Problem: No video present 1. Is the Power LED in the device illuminated? Answer — No  Check to insure power adapter is properly co

Modelos relacionados FSS21611S

Comentarios a estos manuales

Sin comentarios

Nitek FSS20811S Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Nitek FSS20811S. Nitek FSS20811S User Manual Manual de usuario

Indice de contenidos

Modelos relacionados FSS21611S

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Nitek FSS20811S